Intermec SF61B 1D Guide de l'utilisateur télécharger pdf (Page 67)

Chapter 3 — Configure the SF61B Cordless Scanner

SF61 Cordless Scanner User’s Guide 55

Online Setup with EasySet

To configure your scanner online by sending commands from EasySet

1 Pair your SF61B with your EasySet host PC and connect it using

one of the following methods described in Chapter 2:

• for an HID connection: see To connect in HID device

profile (with HID, pairing and connection are simultaneous)

• for a host-initiated (Outgoing) SPP connection: see To

connect in SPP device profile—outgoing connection.

2 Start EasySet and select the SF61B product (Product > Select >

Handheld scanners > SF61B).

If the Select product dialog box does not appear, choose Product >

Select or click on the product icon in the upper left corner of the

EasySet window.

3 Select Communication > Select communication interface. The

Device Selection dialog box appears.

4 Select the connection channel corresponding to the connection

method you have chosen (Bluetooth Keyboard for an HID

connection or the Outgoing virtual COM port for a host-initiated

SPP connection) and click OK.

5 EasySet connects to your scanner and displays your scanner’s

current configuration settings in blue next to the commands.

These settings are indicated by a blue check mark or blue text.

Open the folders in the EasySet commands window to find the

configuration commands you need and double-click each

command to send it to your scanner.

Note: In the following procedure you will use one of the following

methods to connect your scanner to EasySet for online setup:

• HID Bluetooth connection

• host-initiated (Outgoing) SPP Bluetooth connection

Note: The scanner does not beep when you send configuration

commands online from EasySet. It powers off when you select

Disconnect from the Communication menu in Easyset.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 103 104

Pas de commentaire

Intermec SF61B 1D Guide de l'utilisateur Page 67