Intermec CK3R Manuel d'utilisateur télécharger pdf (Page 72)

Chapter 3 — Configure the Computer

60 CK3R and CK3X Mobile Comptuer User Manual

2 Select Communications > 802.11 Radio > Funk Security.

3 Select a Funk security profile to configure.

4 Enter the SSID.

5 For Association, select WPA or WPA2.

The default encryption is TKIP or AES, respectively.

6 For 8021x, select None.

7 For Pre-Shared Key, enter the pre-shared key or passphrase:

• Enter the pre-shared key (0x followed by 32 hexadecimal pairs)

for your access point.

• Enter the passphrase (8 to 63 ASCII characters) for your

authenticator. The computer internally converts the passphrase

to a pre-shared key.

8 Tap OK.

Configure 802.1x Security with Funk Security

Before you set 802.1x-WEP security with Funk security, you need to

enable the radio on your computer and set the date. To use TLS

protocol, you also need to load a user and root certificate. Intermec

recommends that you use WPA2-802.1x instead of 802.1x-WEP if

possible.

1 Start Intermec Settings.

2 Select Communications > 802.11 Radio > Funk Security.

3 Select a Funk security profile to configure.

4 Enter the SSID.

5 For Association, select Open.

6 For Encryption, select WEP.

7 For 8021x, select TTLS, PEAP, or TLS.

8 If you selected TTLS or PEAP:

a For Prompt for Credentials, select Enter credentials now.

b Enter a User Name and a User Password.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 137 138

Pas de commentaire

Intermec CK3R Manuel d'utilisateur Page 72