Intermec CN51 Manuel d'utilisateur télécharger pdf (Page 98)

Chapter 6 — Configure the Computer

86 CN51 Mobile Computer User Manual

Configure the Computer Remotely with

SmartSystems

You can use Intermec Settings from a SmartSystems console to

remotely configure all the Intermec computers. For help using

Intermec Settings, click Help > Contents. For information on all the

parameters in Intermec Settings, see the Intermec Settings Command

Reference Manual.

1 In the SmartSystems console, select a computer and then

right-click on it. A list appears.

2 Select Start Intermec Settings.

3 Configure the settings you want to change. As you select

parameters, help for each parameter appears in the upper right

pane.

4 When you are done making changes, select File > Save Settings.

About Network Communications

You can use the mobile computer in your wireless or wired data

collection network. You can connect your computer using:

• 802.11 radio communications.

• Ethernet communications.

• Bluetooth communications.

• USB and serial communications.

Configure 802.11 Radio Communications

The CN51 has an 802.11b/g/n or 802.11a/b/g/n radio to transfer data

using wireless communications. Before you configure radio

communications, you need to have your wireless network set up

including your access points.

Caution: Make sure all components with antennas are at least 30

cm (1 ft) apart when power is applied. Failure to comply could

result in equipment damage.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 155 156

Pas de commentaire

Intermec CN51 Manuel d'utilisateur Page 98