Intermec CK32IS Manuel d'utilisateur télécharger pdf (Page 82)

Chapter 3 — Configuring the CK32 I-Safe

66 CK32 I-Safe Handheld Computer User’s Manual

If you choose TLS:

a Load a user and root certificate on your CK32 I-Safe. For

help, see “Loading a Certificate” on page 80.

b For Validate Server Certificate, choose Yes.

c You must enter a User Name and Subject Name. You can

also enter a Server Common Name if you want to

increase your level of security.

8 Save your settings.

To enable WPA-PSK or WPA2-PSK with Funk security

1 Open Intermec Settings.

2 Make sure you have configured the communications

parameters and selected Funk as your security choice.

3 Make sure you have selected Funk as your security choice.

4 Open Intermec Settings.

5 Choose Communications > 802.11 Radio > Funk Security

> Profile.

6 For Association, choose WPA or WPA2.

7 For 8021x, choose None.

8 For Pre-Shared Key, enter the pre-shared key or the

passphrase.

The pre-shared key may be given in hexadecimal by prefixing

a string of 64 hex digits with 0x for a total of 66 characters, or

by entering a passphrase of 8 to 63 characters.

The pre-shared key value must exactly match the key on the

authenticator.

9 Save your settings.

Configuring 802.1x Security With Funk Security

1 Open Intermec Settings.

Note: You must have the date on the CK32 I-Safe set

correctly when you enable Validate Server Certificate.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 148 149

Pas de commentaire

Intermec CK32IS Manuel d'utilisateur Page 82