Intermec PC43t Manuel d'utilisateur télécharger pdf (Page 76)

Chapter 2 — Set Up the Printer

62 PC23 and PC43 Desktop Printer User Manual

How to Set Up an Icon Printer

If your printer has the icon front panel, follow these guidelines for

connecting and setting up the printer. The way you set up an icon

printer depends on whether you plan to connect the printer to your

network or to a single PC.

If your network automatically assigns communications parameters

(such as IP addresses) to devices, you can set up the printer through the

printer web page. The printer web page allows you to configure all

settings, print test labels, and perform other management and setup

tasks.

If your network does not automatically assign communications

parameters to devices, or if you plan to connect the printer to a single

PC, you must use the PrintSet 5 application to set up the printer.

Set Up an Icon Printer without a Network Option

Follow this procedure to set up an icon printer that does not have the

Ethernet or Wi-Fi network options. You configure printer settings

through the Windows print driver.

1 Make sure the printer is turned on and connected to your desktop

PC with a USB cable.

2 On your desktop PC, select Start > Devices and Printers.

3 In the Printers and Faxes section, right-click the printer and select

Printing preferences.

You can change printer settings in the Printing Preferences dialog

box. For more information on the Windows print driver settings,

click Help.

Note: Before you begin, use InterDriver to install the driver for the

printer on your desktop PC.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 189 190

Pas de commentaire

Intermec PC43t Manuel d'utilisateur Page 76