Intermec 741 (Windows Mobile 5.0) Manuel d'utilisateur télécharger pdf (Page 27)

Chapter 1 — Using the Computer

741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 17

To scan bar code labels with the laser scanner or linear imager

1 Press I/O to turn on the computer.

2 Point the scanner window at the bar code label and hold the computer

at a slight angle 15 to 25 cm (6 to 10 in) from the label.

3 Press either side Scan button, or pull the trigger on a handle, and direct

the red beam so that it falls across all bars in the bar code label.

Use this test bar code:

Code 39 Test Bar Code

*123456*

When the computer successfully reads a bar code label, you hear a high

beep and the green Scanning LED turns on briefly.

4 Release the side Scan button or the trigger.

To scan a PDF417 or Micro PDF417 bar code with the linear imager

1 Press I/O to turn on the computer.

2 Point the scanner window at the PDF417 or Micro PDF417 bar code

label and hold the computer at a slight angle 15 to 25 cm (6 to 10 in)

from the label.

3 Press either side Scan button, or pull the trigger on a handle, and direct

the red beam so that it falls across the top row of the bar code label.

Use this test bar code:

PDF417 Test Bar Code

*123456789abcdefg*

4 Move the beam down all rows of the bar code label. The computer

clicks as it reads each row.

5 The computer emits a high beep and the Scanning LED turns on briefly

when the computer successfully reads the entire bar code label.

6 Release the side Scan button or the trigger.

Scanning With an Area Imager

If the computer has an area imager, use the following procedure to practice

scanning a bar code. The area imager lets you scan 2D bar code

symbologies and supports omni-directional (360°) scanning. Omni-

directional scanning means that you can position the computer in any

orientation to scan a bar code label. Using the area imager is very similar to

taking a picture with a digital camera.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 113 114

Pas de commentaire

Intermec 741 (Windows Mobile 5.0) Manuel d'utilisateur Page 27