Intermec 741 (Windows Mobile 5.0) Manuel d'utilisateur télécharger pdf (Page 61)

Chapter 3 — Configuring the Computer

741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 51

Configuring WPA Security With Funk Security

Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or

WPA2-PSK security on your 751 with Funk security.

To configure WPA-802.1x or WPA2-802.1x with Funk security

1 Make sure you have configured the communications and radio

parameters on your 751.

2 Make sure you have selected Funk as your security choice.

3 Open Intermec Settings.

4 Choose Communications > 802.11 Radio > Funk Security > Profile.

5 For Association, choose WPA or WPA2 and press Enter. Encryption

automatically defaults to TKIP if you are using WPA. Encryption

automatically defaults to AES if you are using WPA2.

6 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS and press Enter.

If you choose TTLS or PEAP:

a For Prompt for Credentials, choose Enter credentials now.

b Select User name and type your user name.

c Select User Password and type a user password.

d For Validate Server Certificate, choose Yes.

If you choose TLS:

a Load a user and root certificate on your 751. For help, see “Loading

a Certificate” on page 64.

b For Validate Server Certificate, choose Yes.

c You must enter a User Name and Subject Name. You can also enter

a Server Common Name if you want to increase your level of

security.

7 Exit Intermec Settings.

To enable WPA-PSK or WPA2-PSK with Funk security

1 Make sure you have configured the communications and radio

parameters on your 751.

2 Make sure you have selected Funk as your security choice.

3 Open Intermec Settings.

4 Choose Communications > 802.11 Radio > Funk Security > Profile.

Note: You can use Prompt for credentials to troubleshoot your connection to

the network if you have problems.

Note: You must have the date on the 751 set correctly when you enable

Validate Server Certificate.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 113 114

Pas de commentaire

Intermec 741 (Windows Mobile 5.0) Manuel d'utilisateur Page 61