Intermec CN4 Manuel d'utilisateur télécharger pdf (Page 75)

Chapter 2 — Connecting and Configuring the CN4

CN4 Mobile Computer User’s Manual 63

8 For Pre-Shared Key, enter the pre-shared key or passphrase.

The pre-shared key must be a value of 32 hex pairs preceded by 0x

for a total of 66 characters. The value must match the key value on

the access point. The passphrase must be from 8 to 63 characters.

After you enter a passphrase, the CN4 internally converts it to a

pre-shared key.

This value must match the passphrase on the authenticator.

9 Save your settings.

Configuring 802.1x Security With Funk Security

1 Make sure the communications and radio parameters on your

CN4 are configured.

2 Make sure Funk is selected as your security choice.

3 Start Intermec Settings.

4 Choose Communications > 802.11 Radio > Funk Security.

5 Select the profile you want to configure.

6 For Association, choose Open.

7 For Encryption, choose WEP.

8 For 8021x, choose TTLS, PEAP, or TLS.

9 If you chose TTLS or PEAP:

a Enter a User Name.

b For Prompt for Credentials, choose Enter credentials now.

c Enter a User Password.

d For Validate Server Certificate, choose Yes.

If you choose TLS:

a Load a user and root certificate on your CN4. For help, see

“Loading a Certificate” on page 68.

b For Validate Server Certificate, choose Yes.

c Enter a User Name and Subject Name.

Note: You can use Prompt for Credentials to troubleshoot

your network connection.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 144 145

Pas de commentaire

Intermec CN4 Manuel d'utilisateur Page 75