Intermec CN4 Manuel d'utilisateur télécharger pdf (Page 97)

Chapter 3 — Developing and Installing Applications

CN4 Mobile Computer User’s Manual 85

Upgrading the CN4 Using a miniSD Card

To use a miniSD card to upgrade the computer, you need an SD card

reader and a miniSD adapter card formatted as FAT16.

To upgrade the operating system using a miniSD card

1 Copy all required OS upgrade files to the miniSD card.

2 Insert the miniSD card into the CN4. For help, see “Installing a

miniSD or SIM Card” on page 37.

3 Place the CN4 in a dock connected to external power and use a

stylus to press the Reset button located in the battery cavity on the

back of the CN4. For help, see “Cold Booting the CN4” on

page 98.

4 Remove the miniSD card when the Installation Complete menu

appears.

5 Remove the CN4 from the dock and replace the battery.

To upgrade the SSPB using a miniSD card

1 Copy all required SSPB upgrade files to the miniSD card.

2 Insert the miniSD card into the CN4.

3 Clean boot the CN4. For help, see “Clean Booting the CN4” on

page 99. When the clean boot is complete, the CN4 warm boots to

reset the configuration.

4 (Optional) Remove the miniSD card or delete the files on the

miniSD card. During the clean boot, the files were copied from the

miniSD card to the Flash File Store.

5 Set the network communication parameters to reestablish

communications with the other devices in the wireless network.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 144 145

Pas de commentaire

Intermec CN4 Manuel d'utilisateur Page 97