Intermec PC43t Manuel d'utilisateur télécharger pdf (Page 45)

Chapter 1 — About the Printers

PC23 and PC43 Desktop Printer User Manual 31

Charge the Battery

When the battery base is connected to AC power, the LEDs indicate the

charging status of the battery.

1 Make sure that the PC43d is properly installed on the base. For

help, see the PC43d Battery Base Installation Instructions.

2 Connect the power cord from the battery base to the printer.

3 Connect the battery base to AC power.

The battery begins to charge and the battery base LEDs turn on to

indicate charge status. The battery is fully charged in 4 hours.

Power the PC43d with the Battery Base

After you charge the battery, you can use the battery base accessory to

power the PC43d printer. When the battery base is not connected to

AC power, press the Charge Level button on the front of the base to

turn on the LEDs and see the current charge level.

1 Charge the battery in the battery base.

2 Disconnect the power cable from AC power.

3 Turn on the printer. The LEDs on the battery base turn off.

-&%T

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 189 190

Pas de commentaire

Intermec PC43t Manuel d'utilisateur Page 45