Intermec PC43t Manuel d'utilisateur télécharger pdf (Page 83)

Chapter 2 — Set Up the Printer

PC23 and PC43 Desktop Printer User Manual 69

Calculate RFID Tag Position

You can perform a manual calculation to come up with an estimate of

the RFID Tag Position. Because this value is an estimate, you may need

to slightly adjust the calculated value to achieve the best results.

1 Make sure Start Adjust and Stop Adjust are set to 0.

2 Measure the yChip value, which is the distance between the RFID

chip and the media edge aligned with the tear bar.

3 Note the yAntDist value for your printer:

• PC23d: 280 dots, 35 mm, 1.378 in

• PC43d: 260 dots, 33 mm, 1.299 in

• PC43t: 256 dots, 32 mm, 1.260 in

4 Use this formula to calculate the estimated Tag Position:

TagPosition=yChip - yAntDist

Z$IJQ

/FYUMBCFM

3'*%DIJQ

.FEJBFEHF

BMJHOFEXJUI

UFBSCBS

-BCFMUPQ

PGGPSN

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 189 190

Pas de commentaire

Intermec PC43t Manuel d'utilisateur Page 83