Intermec PF2i Manuel d'utilisateur télécharger pdf (Page 118)

Chapter 4 — Troubleshooting and Maintaining the Printer

104 PF2i and PF4i Mid-Range Printer User’s Manual

Resetting the Printer

When you reset the printer, you return it to the factory default

settings. Resetting the printer removes all files used to store settings.

But, it does not reset settings that have already been read when the

files. So, wireless communication settings, such as SSID and keys

retain their values from the previous start. However, the next reboot

resets them to the factory default values.

When I send a TAGREAD or

TAGWRITE command, I get this

error message: “Tag format error.”

The TAGFORMAT defined for the operation determines

the number of required parameters. You may need to

modify the TAGFORMAT. For help, see the Intermec

Fingerprint Command Reference Manual or the IPL

Command Reference Manual. For more information, see the

EPC Tag Data Standard (v1.1, revision 1.27) available from

the EPCglobal web site at www.epcglobalinc.org.

Data can be written unlawfully to a

write protected ISO 18000-6B tag.

For some ISO 18000-6B tag chips, the functionality to

protect the tag memory from being rewritten has not been

implemented. Switch to tags with a different chip that have

this functionality implemented.

I can read ISO 18000-6B tags, but

when I try to read Class 1 tags, I get

this error message: “No tag found.”

Class 1 tags require an MPR6100 RFID Radio Module. To

order an MPR6100 kit, contact your local Intermec

representative.

(Fingerprint only) My printer

displays an error code.

Use the error code text to troubleshoot the problem:

1320 No RFID support installed.

1321 No tag found.

1322 Access outside tag memory.

1323 Tag format error.

1324 RFID inactive.

1325 Not supported by tag type.

1326 RFID module too hot.

1327 RFID duty cycle exceeded.

1328 RFID lock error. Tag cannot be locked.

1329 RFID access error. Tag is locked.

Note: If you are using Intermec Direct Protocol, error codes

1320 to 1329 are supported and displayed with the error

text.

RFID Problems and Possible Solutions (continued)

Problem Possible Solution

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 193 194

Commentaires sur ces manuels

Pas de commentaire

Intermec PF2i Manuel d'utilisateur Page 118

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes d'étiquettes Intermec PF2i