Intermec PF2i Manuel d'utilisateur télécharger pdf (Page 22)

Chapter 1 — Using the Printer

8 PF2i and PF4i Mid-Range Printer User’s Manual

If you are using Fingerprint, use the F key to load the same type of

media. If you change the media type, or if the printer does not feed the

media properly, simultaneously press the S and F keys to perform

a “testfeed.”

If you are using IPL, save the label with the sensitivity number

attached to the media roll. You need this number to set the media

sensitivity.

Loading Media for Tear-Off Printing

In tear-off, or straight-through, printing mode, you manually tear off

the media against the printer’s tear bar. In tear-off mode, use these

types of media:

• Non-adhesive continuous stock

• Self-adhesive continuous stock with liner

• Self-adhesive labels with liner

• Tickets with gaps (gap stock), with or without perforations

• Tickets with black marks (mark stock), with or without

perforations

You can also install an optional label taken sensor so that the next

copy in the batch is not printed until the current copy is removed. For

more information, see “Accessories for the Printer” on page 145.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 193 194

Pas de commentaire

Intermec PF2i Manuel d'utilisateur Page 22