Intermec CK31 Manuel d'utilisateur télécharger pdf (Page 142)

Chapter 5 — Troubleshooting and Maintaining the CK31

CK31 Handheld Computer User’s Manual 125

Booting the CK31

You seldom need to warm or cold boot the CK31. The CK31

uses the configuration currently saved in flash memory during

the boot process.

You need to boot the CK31 when an application is locked up

and will not respond, when you upgrade the firmware, or when

you reflash the computer. The next instructions explain how you

warm and cold boot the CK31.

Warm Booting the CK31

If your charged CK31 does not resume after pressing I, or if the

computer or an application is locked up, you may need to warm

boot it.

To warm boot the CK31

• Press and hold I for 5 seconds. The CK31 tells you it is

performing a warm boot and the screen comes back up to the

start screen.

Cold Booting the CK31

If the CK31 or application is locked up and does not respond to

a warm boot, follow this procedure to perform a cold boot.

When you perform a cold boot, all data in your RAM storage is

deleted. To make a backup copy of everything in your RAM-

based storage system, see “Backing Up Your Files” on page 91.

To cold boot the CK31

1 Remove the battery.

2 Using a small pointed device (such as the end of the stylus),

press the reset switch on the backside of the CK31.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 207 208

Pas de commentaire

Intermec CK31 Manuel d'utilisateur Page 142