Intermec CK31 Manuel d'utilisateur télécharger pdf (Page 39)

Chapter 1 — Using the CK31 Handheld Computer

22 CK31 Handheld Computer User’s Manual

Changing the Beeper Volume

Method Procedure

Use the keypad.

Press C and then press E to increase the

volume. There are five beep volumes on the

CK31 including off. When you reach the

loudest setting, the next setting is off.

Use the Intermec

Settings application.

Go to Start > Intermec Settings > Device

Settings > Beeper > Volume.

Use the Beeper

Volume command.

For help, see “Beeper Volume” in the Intermec

Computer Command Reference Manual.

Scanning Bar Codes

Do not look directly into the window area or at a reflection

of the laser beam while the laser is scanning. Long-term

exposure to the laser beam can damage your vision.

Use the scanner to scan and enter bar code data. The type of

scanner you are using and the type of bar code you are decoding

determines the way you scan the bar code. The CK31 supports

the scanning of 1D linear bar codes and 2D images, depending

on the scanner model in your CK31. Plus, the way you scan bar

codes is different if you are using an integrated handle or a

scanner attached to the serial port.

When you unpack the CK31, these bar code symbologies are

enabled:

• Code 39

• Code 128

• PDF417 (if supported)

• UPC/EAN

• DataMatrix (area imagers only)

If you are using bar code labels that are encoded in a different

symbology, you need to enable the symbology on the CK31.

Use Intermec Settings to enable and disable symbologies for

your scanner. For help, see “Configuring the CK31 With

Intermec Settings” on page 40.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 207 208

Pas de commentaire

Intermec CK31 Manuel d'utilisateur Page 39