Intermec 073290-001 Fiche technique télécharger pdf (Page 31)

Chapter 2 — Replacing Parts

Keypad

assembly

Keypad

flex

cable

4 Remove the adhesive residue left by the keypad assembly on the top

cover.

5 Remove the adhesive backing from the new keypad assembly.

Keypad

assembly

Adhesive

backing

6 Connect the keypad flex cable to the keypad assembly and firmly attach

the keypad assembly to the top cover. Make sure the keypad flex cable

properly z-folds under the main PCB.

7 Insert a new bezel assembly. For help, see “Replacing the Bezel

Assembly” on page 17.

Replacing the SE1200 Scanner

To replace the SE1200 scanner, you need the following tools:

• T10 Torx screwdriver

• Small Phillips screwdriver

You also need one or more of the following parts depending on what you

need to replace:

• SE1200 standard range scan engine assembly (P/N 590014-004)

• SE1200 advanced long range scan engine assembly (P/N 591098-003)

• SE1200 CK30 scan flex cable (P/N 072781-003)

• SE1200 shield (P/N 073883-002) (if necessary)

• SE1200 visor (P/N 073703-003)

• Large scan mount bracket (P/N 072865-002)

• M2 x 0.4 by 4mm steel panhead screw (P/N 800-318-004)

• Phillips 2-28 x .250 thread-form screw (P/N 525301)

CK30 Handheld Computer Service Manual 21

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 112 113

Pas de commentaire

Intermec 073290-001 Fiche technique Page 31