Intermec EASYCODER PD4 Manuel d'utilisateur télécharger pdf (Page 98)

88 Intermec EasyCoder PD4—User’s Guide

Appendix D—Firmware Upgrading

Requirements

To upgrade the printer’s ﬁrmware via a cable connection from a PC run-

ning MS Windows, you will need the following:

• e Intermec EasyCoder PD4 Conﬁg Tool. is is a free software

running under Microsoft Windows

. It makes it possible to download

various ﬁrmware version either directly to the printer or to a memory

cartridge. It also supports font downloading and memory partitioning.

e Conﬁg Tool supports seven languages and comes with a compre

hensive on-line help in English.

• An upgrading ﬁle (.ufz). e Intermec EasyCoder PD4 Conﬁg Tool

comes with a collection of ﬁrmware upgrading ﬁles. New ﬁles can be

downloaded from the Intermec Web site (

http://www.intermec.com)

and should be located in the subfolder “Firmware.”

• A host computer running Microsoft Windows with a parallel, USB, or

RS-232 connection to the EasyCoder PD4. (Parallel or USB connec

tions are recommended.)

Instructions

1 Install the Intermec EasyCoder PD4 Conﬁg Tool in your PC.

2 Run the PD4Conf.exe program.

3 Set up the parameters for the ﬁrmware download. Use the on-line

help for instructions.

4 Start the Firmware download wizard and follow the instructions on

the screen.

/. Supported versions of MS Windows: Windows 95, Windows 98, Windows Me, Win-

dows 2000, and Windows XP.

1 2 ... 93 94 95 96 97 98 99 100

Pas de commentaire

Intermec EASYCODER PD4 Manuel d'utilisateur Page 98